CyberPower PowerPanel Manuel d'utilisateur
Naviguer en ligne ou télécharger Manuel d'utilisateur pour Unités de distribution d'électricité (PDU) CyberPower PowerPanel. CyberPower PowerPanel User`s manual Manuel d'utilisatio
- Page / 2
- Table des matières
- MARQUE LIVRES
Noté. / 5. Basé sur avis des utilisateurs
PowerPanel
Software User’s Manual
K01-0PP000A
Overview
Installation Guide
Operating Instructions
(Cyber Power UPS can provide surge suppression and battery backup without the software.
However, if you need to schedule for UPS Auto-shutdown, then it is necessary to install the
software.)
USB Function (Optional)
1. Turn off your UPS
2. Connect the serial interface cable to your UPS and the open serial port on the rear panel of the
computer. If you would like to use USB interface, please connect the USB adapter with the Serial
Cable then connect the USB to your computer. (See the figure)
3. Plug the UPS into an AC outlet, turn the UPS on and start your computer.
4. .Follow the instructions on the User’s Manual to complete the installation.
For Windows 95 /98 /ME
1. Turn the UPS off and unplug it.
2. Connect the serial interface cable to serial port on the UPS and an open serial port on the back of
the computer. (Note: You must use the serial cable that was supplied with the unit).
3. Plug the UPS into an AC outlet, turn the UPS on and start your computer.
4. Once the computer was finished booting, insert the PowerPanel disk into the floppy drive.
5. Click on Start, point to Settings, and then click Control Panel.
6. Double-click on Add / Remove Programs.
7. Click the Install Button, and follow the on-screen instructions.
8. When the installation is completed, remove the floppy disk.
For Windows NT
1. Click on Start, point to Settings, then click Control Panel.
2. Double-click the UPS Icon.
3. Remove the checkmark from the box labeled UPS is installed on, and Click OK.
4. Acknowledge the message that the UPS is in an unknown state and exit to the desktop.
5. Shutdown your computer.
6. Turn off the UPS and unplug it.
7. Connect the serial interface cable to serial port on the UPS and an open serial port on the back of
the computer. (Note: You must use the serial cable that was supplied with the unit).
8. Plug the UPS into an AC outlet, turn the UPS on and then start your computer.
9. Click on Start, point to Settings, then click Control Panel.
10. Double-click on Add / Remove Programs.
11. Click the Install Button and follow the on-screen instructions.
12. When the installation is complete, remove the floppy disk.
For Windows 2000
1. Click on Start, point to Settings, then click Control Panel.
2. Double-click on Power Options.
3. On the UPS Tab, click Select.
4. In the UPS selection dialog box, under Manufacturers, select None.
5. Exit to the desktop.
6. Shutdown the computer, then turn the UPS off and unplug it.
7. Connect the serial interface cable to serial port on the UPS and an open serial port on the
computer. (Note: You must use the serial cable that was supplied with the unit).
8. Plug the UPS into an AC outlet, turn the UPS on, and then start your computer.
9. Insert the PowerPanel™ software disk into the floppy drive.
10. Click on Start, point to Settings, and then click Control Panel.
11. Double-click on Add / Remove Programs.
12. Click the Install Button, and follow the on-screen instructions.
13. When the installation is completed, remove the floppy disk.
For Windows XP (Home and Professional)
1. Click on Start, and then click on Control Panel.
2. Double-click on Power Options, and then click the UPS tab.
3. Set the manufacturer to None.
4. Exit to the desktop and then shutdown your computer.
5. Connect the serial interface cable to serial port on the UPS and an open serial port on the back of
the computer. (Note: You must use the serial cable that was supplied with the unit).
6. Plug the UPS into an AC outlet, turn the UPS on and then start your computer.
7. Insert the PowerPanel disk into the floppy drive.
8. Click on Start, and then click Control Panel.
9. Double-click on Add or Remove Programs.
10. Click on Add New Programs, and then click the CD or Floppy Button.
11. Follow the on-screen instructions.
12. When the installation is completed, remove the floppy disk.
When the installation is completed, the PowerPanel software will appear on your screen for a few
seconds, and then minimize. It will appear as a blue and white battery icon located in the system
tray, near the clock.
PowerPanel Main Window Description (See Figure 1 )
1. Minimize Button: This button is used to minimize the software.
2. Power : Clicking on the power button will exit the PowerPanel window.
3. Setup : Click the setup button to open the Setup Window.
4. Log: Click on the log button to open the Log Window.
5. Schedule: Click the schedule button to open the Scheduled Shutdown Window.
6. AC Power Indicator: This indicator appears in a green color when AC power in normal. When the power fails,
the indicator will change to a red color with an “X” through it.
7. Battery OK Indicator: This indicator appears in a green color when AC power is normal and the unit and software
are communicating.
8. Scheduled Shutdown: If there is a shutdown scheduled within seven days, the information will be displayed here.
The user can schedule a shutdown in the Scheduled Shutdown Window.
9. Final Countdown: When the final countdown timer reaches zero, the software will begin shutting down the system.
This can be adjusted in the Setup Window.
PowerPanel version 2.1.4 or greater is designed for use with Windows 95, Windows 98, Windows
Me, Windows NT, Windows 2000, and Windows XP. The latest version can be downloaded from
www.cyberpower-eu.com/download.html. It works in conjunction with the UPS to provide full
protection of valuable computer systems, applications and data. In the event of a power failure,
PowerPanel automatically saves and closes open files under auto-assigned file names or
existing files names after a software controlled delay. The computer and UPS are automatically
shutdown to conserve battery power. Files with auto-assigned names will be saved under
C:\PCTemp, where C is the name of your main hard drive.
Files that have previously been saved will be saved in their original location.
PowerPanel is equipped with a Scheduled Shutdown feature which can automatically save and
close open files and then shutdown the computer and UPS at a user specified date and time. Use
of this feature is optional and is not required for the power failure shutdown to occur.
The use of the PowerPanel software is optional. The UPS unit will provide full surge suppression
and battery backup without the software. You must use the software if you wish to have the
automatic shutdown feature.
PowerPanel Setup Window (See Figure 2 )
1. Delay between Warning Messages: User adjustable setting for the delay between the audible alarms that occur during
a power failure.
1
2
Résumé du contenu
Page 1 - PowerPanel
PowerPanelSoftware User’s ManualK01-0PP000AOverview Installation GuideOperating Instructions (Cyber Po
Page 2 - Testing Your UPS System
2. Time between Power Failure and Initial Warning: This setting determines the delay between when the power fails and the first audible alarm. 3.
Plus de documents pour Unités de distribution d'électricité (PDU) CyberPower PowerPanel
CyberPower PowerPanel Guide d'installation
(21 pages)
CyberPower PowerPanel Manuel d'utilisateur
(15 pages)
CyberPower PowerPanel Manuel d'utilisateur
(39 pages)
CyberPower PowerPanel Manuel d'utilisateur
(14 pages)
Produits connexes et manuels pour Unités de distribution d'électricité (PDU) CyberPower PowerPanel
(21 pages)© 2020, manymanuals.fr. Tous droits réservés | 3.446 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels