CyberPower PDU15SW8RNET Manuel d'utilisateur télécharger pdf (Page 23)

PowerPanel™ Business Edition

 Normal: The batteries are working normally.

z Voltage: The present voltage supplied by the batteries.

z Remaining Runtime: The amount of time that the UPS can supply power to its load.

z Remaining Charge Time: The remaining time the batteries required to be fully charged.

z Capacity: The present capacity of the batteries expressed as a percentage of full charge.

System

z Status: Displays the present operating status of the UPS.

 Normal: The operating status is normal.

 Fault: The UPS is in fault state due to an internal malfunction.

 Overheat: The temperature exceeds the normal temperature threshold.

z Temperature: The present internal temperature of the UPS. It is displayed in both Celsius (°C) and

Fahrenheit (°F).

Note: Not all models provide the same information. The information displayed will vary by model.

Information

UPS/Information page

The UPS/Information page shows information about the UPS:

z Model: The model name of the UPS.

z Firmware Version: The firmware version of the UPS.

z Serial Number: The serial number of the UPS.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 99 100

Pas de commentaire

CyberPower PDU15SW8RNET Manuel d'utilisateur Page 23