CyberPower PDU15SW8RNET Manuel d'utilisateur télécharger pdf (Page 35)

PowerPanel™ Business Edition

z Contact: Who to contact about the UPS/PDU.

z MAC Address: The MAC address of the UPS RMCARD, PDU or Agent’s network interface.

z IP Address: The IP address of the UPS RMCARD, PDU or Agent’s network interface. Click the hyperlink

to open the web interface of the UPS RMCARD, PDU or Agent.

Note: Not all models provide the same information. The information displayed will vary by model.

Configuration

In order for the Client to operate properly, the correct network address of power device, which is UPS

RMCARD, PDU or Agent, must be assigned for the outlet. Power/Configuration page is used to configure

the network address of power device and outlet assignment:

Power/Configuration page

In order to establish communication between Client and the power device, the IP address must be

configured in Client.

z Address: Assigns the network address of the power device. Enter the IP address or use the pull down to

show the device list and select a device address from the list. Clicking the refresh button (the icon with

the rotating arrow) forces the Client to search the local network for all power devices and update the

results in the device list. After entering the IP address, the Client will update the Connected Outlet option

and Outlet Preview according by inquired outlet information.

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 99 100

Pas de commentaire

CyberPower PDU15SW8RNET Manuel d'utilisateur Page 35