CyberPower PDU20SW8RNET Manuel d'utilisateur télécharger pdf (Page 96)

A confirmation window of a PDU power on operation

 Power Cycle: Initiates a Power Cycle on the UPS/PDU/ATS. This will turn the UPS/PDU/ATS off then back on or

vice versa. Decide whether to initiate an immediate or a sequenced power cycle and click OK to begin. A

sequenced power cycle will cause computers connected to the UPS/PDU/ATS that have Agent or Client installed

to shut down prior to the power cycle.

Note: An immediate power cycle off will likely result in connected computers losing power.

A confirmation window of a PDU power cycle operation

Note: If a PDU is connected to a UPS, a power off or a power cycle to the UPS may also cause all computers on this

PDU to shutdown.

Battery Test

Click Battery Test from the context menu and the UPS will initiate a battery test.

Mute

Click Mute from the context menu to mute the alarm.

Alarm

Click Alarm from the context menu to enable or disable the UPS alarm.

Preferred Source

Click Preferred Source from the context menu to select which input source to be preferred to use.

Group Management

UPS/PDU/ATSs can be grouped for easy management. Orders can then be issued to multiple devices in a group.

Add Group

1 2 ... 91 92 93 94 95 96 97 98 99 100 101 ... 132 133

Pas de commentaire

CyberPower PDU20SW8RNET Manuel d'utilisateur Page 96